result(s) found for .

How to add B.One Energy Manager (Wattwatchers Unit - Auditor 3M / 6M)?

  • Install Wattwatchers unit (Auditor 3M / 6M).

  • In the B.One App, tap on Devices and select Add Device.

  • Under Add A Device, select Energy Management and tap on Auditor 3M / 6M.

  • Enter the Name. Enter and re-enter the serial number on the device or scan the barcode. Tap Next.

  • Assign Channel and select the Consumption / Production energy type. Set your daily Energy Production capacity and tap Next.

For example, in our case, we have 3 devices consuming energy and the other 3 devices producing energy. So, we have set 3 channels as consumption and the other 3 as Production.

  • Now, assign switches else select N/A and tap on Save. For example, in our case we have chosen a switch as N/A since we do not wish to control it through the app.

  • You can view the last 5 minutes Consumption / Production status of the assigned channels. You can also control switches if assigned.

Note: It takes up to 30 seconds to reflect the status of the switches.

  • Tap on settings icon at the top-right corner to edit name, switches and to view the history.

Layout inspired by